Table of Contents
Advertisement
Chapter II: Quick Setup and Basic Settings
2-1 Installing the HWREN2
Complete the following instructions to build the network connection
between your new wireless range extender and your computers or
network devices:
1. Connect the range extender to your computer (source) through the
LAN port of the range extender by Ethernet cable or connect to it
wirelessly.
2. Connect the A/C power adapter to the wall socket, and then connect it
to the 'Power' socket of the range extender.
3. Please check all LEDs on the front panel. LAN LEDs should be on if
the range extender is correctly connected to the router. If it is not on,
or any LED you expect is not on, please recheck the cabling, or jump
to '6-2 Troubleshooting' for possible reasons and solutions.
7
Hide quick links:
Advertisement
Table of Contents
