Canon PIXMA iP6000D Service Manual page 19

(4) Waste ink counter setting
When the logic board ass'y is replaced, reset the waste ink counter. In addition, according to the waste ink amount, replace the waste ink absorber (the bottom
case unit or the ink absorbers). The standard amount for waste ink absorber replacement is given in the table below.
Waste ink amount
Less than 7%
7% or more
*1: Check the waste ink amount by service test print or EEPROM information print.
[See 3-3. Adjustment / Settings, (6) Service mode, for details.]
(5) User mode
Function
Nozzle check pattern printing
Print head manual cleaning
Print head deep cleaning
Automatic print head
alignment
Manual print head alignment
Print head alignment values printing
Head-to-paper distance setting
Contrast adjustment
Quiet mode setting
Language selection
Paper feed roller cleaning
Bottom plate cleaning
Print head replacement
1 - 12
*1
Procedures
On standalone printers, press the Menu button
to move to Maintenance, and perform the
selection. (Nozzle check)
Cleaning both black and color:
On standalone printers, press the Menu button
to move to Maintenance, and perform the
selection. (Head
cleaning
Cleaning both black and color:
On standalone printers, press the Menu button
to move to Maintenance, and perform the
selection. (Deep cleaning
On standalone printers, press the Menu button
to move to Maintenance, and perform the
selection. (Auto head align
On standalone printers, press the Menu button
to move to Maintenance, and perform the
selection. (Manual head align
Print and confirm the print head alignment values set in
the printer.
On standalone printers, press the Menu button to move to
Maintenance, and perform the selection. (Manual head
align)
The head-to-paper distance setting can be set to Auto or
Thick paper.
On standalone printers, press the Menu button to move to
Maintenance, and perform the selection. (Thick paper)
The contrast of the LCD viewer on the printer can be
adjusted.
On standalone printers, press the Menu button to move to
Maintenance, and perform the selection. (Contrast)
The quiet mode can be set to On or Off.
On standalone printers, press the Menu button to move to
Maintenance, and perform the selection. (Quiet mode)
Languages to be displayed on the LCD viewer of the
printer can be set.
On standalone printers, press the Menu button to move to
Maintenance, and perform the selection. (Languages)
See "Standalone printer operation 2" below.
See "Standalone printer operation 2" below, or perform
from the printer driver's Maintenance tab.
The print head is replaceable at the same time position as
for ink tank replacement.
(Open the cover. When the carriage stops at the center, the
.)
print head can be replaced
Bottom case unit or ink absorber replacement
Not required.
Required.
)
)
)
)
Remarks
Also available from "Standalone
printer operation 2" below or printer
driver's maintenance sheet.
Also available from "Standalone
printer operation 2" below or printer
driver's maintenance sheet.
Also available from "Standalone
printer operation 2" below or printer
driver's maintenance sheet.
Also available from "Standalone
printer operation 2" below or printer
driver's sheet.
maintenance
In Custom Settings of the printer
driver's Maintenance sheet, manual
print head alignment (by selecting the
optimum values) as with the
models can be performed.
Also available from printer driver's maintenance
sheet.
Clean the platen ribs when the back side of paper
gets smeared.
conventional