Liebert Nfinity User Manual page 30

Redundant Alarm Set: Sets Alarm to notify
user when redundancy is no longer available.
UPS Test: Allows user to test the Batteries,
LED's, LCD, or Alarm.
Service Contact: Set a contact for the user to
reach if problems occur.
Remote Shutdown: Enables / Disables the
Remote Communications Shutdown.
If you are using SiteNet™ software, this
parameter should be enabled in order for the
UPS output to be turned off once the operating
system has been shutdown.
External Battery: Sets total amp-hour for
external batteries to provide a more accurate
runtime remaining value on the LCD display and
through communications.
Enter the following when using the External
Battery Cabinets with Chargers.
(P/N: PB10SLF105WC120)
# Cabinets
1
2
3
4
5
6
Frequency Settings: Sets the input and output
operating frequency of the system.
Frequency Sync Range: Sets the window to
which the system synchronizes to the input
supply.
28
AH Value
0091
0182
0273
0364
0455
0546