Making A Test Object From The Sd Card - MakerBot Replicator 2 User Manual

Desktop 3d printer

Hide thumbs Also See for Replicator 2:

Table of Contents

MAKING A TEST OBJECT FROM THE SD CARD

Locate the SD Card

The MakerBot Replicator 2 package

includes an SD card pre-loaded with files

for making test objects. The SD Card is

located in the SD port directly behind the

LCD Panel.

Select a Project from the SD Card

After you have successfully leveled the build platform and loaded the MakerBot PLA Filament

into the extruder, the LCD panel will ask you: "How'd it go? Ready to make something?"

Select "Yes" and the LCD panel will display: "Awesome! We'll go to the SD card menu and

you can select a model!"

2a. Use the up and down arrow buttons to navigate through the list of models on the SD card.

2b. To select a model, press M.

2c. The MakerBot Replicator 2 will begin to build your object. You can use the LCD panel to

monitor the temperature of the extruder and the status and progress of your object.

C STARTUP PROCESS: LEVELING, LOADING, TESTING

SD Card

Table of Contents

Do you have a question about the Replicator 2 and is the answer not in the manual?