Verifying Network Registration - Multitech MultiModem MTCBA-G-UF1 User Manual
External wireless usb modem data/fax/voice
Hide thumbs
Also See for MultiModem MTCBA-G-UF1:
- Reference manual (203 pages) ,
- Quick start manual (9 pages) ,
- User manual (50 pages)
Table of Contents
Advertisement
Verifying Network Registration
In this procedure, you will verify that the Wireless MultiModem has been registered on the wireless
network. To do so, you will use the common communications program Hyperterminal.
1. Using the Hyperterminal program at the computer to which the Wireless MultiModem is
connected, type the AT command AT+CREG?. A value for the modem's network registration
status will be returned.
2. Verify the result with the following chart:
Note:
If the modem is not registered, perform the procedure for verifying signal strength to determine the
strength of the received signal.
Multi-Tech Systems, Inc. MultiModem® GPRS with USB User Guide
Network Registration Verification
Value
Network Registration Status
0, 1
Yes
0, 5
Yes
(registered roaming)
Chapter 2 – Installation
29
Advertisement
Table of Contents
Need help?
Do you have a question about the MultiModem MTCBA-G-UF1 and is the answer not in the manual?
Questions and answers