Inserting Sim/R-Uim Card Into Holder (Gsm Only) - Multitech MultiModem MTCBA-G-UF1 User Manual
External wireless usb modem data/fax/voice
Hide thumbs
Also See for MultiModem MTCBA-G-UF1:
- Reference manual (203 pages) ,
- Quick start manual (9 pages) ,
- User manual (50 pages)
Table of Contents
Advertisement
Inserting SIM/R-UIM Card
The wireless MultiModem requires a SIM card (Subscriber Identity Module) to operate on a GSM network. Some
CDMA networks, mostly in China, require an R-UIM card (Removable User Identity Module). To install the card,
do the following:
1. Using your fingernail or a small wedging tool (e.g., a small screwdriver), pry off the SIM cover.
2. Insert the SIM card into the holder.
3. Verify that the SIM card fits into the holder properly and then replace the cover.
Multi-Tech Systems, Inc. MultiModem® GPRS with USB User Guide
into Holder
Chapter 2 – Installation
(GSM Only)
14
Advertisement
Table of Contents
Need help?
Do you have a question about the MultiModem MTCBA-G-UF1 and is the answer not in the manual?
Questions and answers