3. Slide the mounting brackets into the corresponding slots on the backside of the MultiModem
chassis.
NOTE: Some MultiModem units will be shipped with a single mounting bracket.
Slide it through the channel on the MultiModem chassis
and secure it with screws.
4. Attach the MultiModem with two screws to the mounting surface at the desired location on the
equipment.
Multi-Tech Systems, Inc. MultiModem® GPRS with USB User Guide
Chapter 2 – Installation
13
Need help?
Do you have a question about the MultiModem MTCBA-G-UF1 and is the answer not in the manual?
Questions and answers