Table of Contents
Advertisement
Ness IQ-MDVR-4 – Mobile Black Box Recorder.
30 seconds, then press the "Check" to make the system calibrate the second area (HZ) set as first
area data (80);
OVER SPEED:
If the vehicle exceeds the SPEED the MDVR will trigger the alarm signal (providing the
option 'ALARM' is set as 'YES') and will stay active until the driver slows down below the
threshold speed.
LOW SPEED:
If the vehicle exceeds the high speed limit, MDVR will trigger the alarm signal (providing
the option 'ALARM' is set as 'YES') until the Admin password is entered to acknowledge
the alarm.
OSD:
To name the event, for example you can name the over speed event as SPDH, and low
speed as SPDL. Whenever the event triggers, SPDH or SPDL will show in OSD.
EN:
To enable the alarm when this kind of event triggers.
Threshold:
The threshold defined the speed. For example, if we define 80KPH as high speed, once the
speed equals or is higher than this amount, it would be activate it as an alarm file.
ALARM:
To enable the flashing LED when the speed alarm is triggered.
LOCK:
To lock the speed alarm files so that it won't be over written during the over-writing process.
6.4.4 ACCELERATION
There are 3 values for G force inertial sensor: X, Y, and Z.
X indicate forward and backward. Y indicates left and right and Z indicated up and down. Threshold is the
limitation for the value, if the value is larger than the setting in the menu, then MDVR will alarm.
This function only can be active when the MDVR connected with inertial sensor. (Sold
separately)
45
User Manual
Advertisement
Table of Contents
