Data/Time - Ness IQ-MDVR-4 User Manual

Ness IQ-MDVR-4 – Mobile Black Box Recorder.
6.1.1 DATE/TIME
DATE FORMAT: Press 【ENTER】to select different format MM/DD/YYYY, DD/MM/YYYY, or YYYY-MM-DD
TIME FORMAT: 12H or 24H, Press【ENTER】to select different formats.
TIME SYNC SOURCE: The system allows you to have the time synchronized via by either "GPS" or "NTP".
A: If you select "GPS", the IQ-MDVR must have GPS connected and GPS signal must be present. To
set the sync time in this menu, and unit will record the time difference-GMT offset, when the
system time signal arrives the sync time, unit will synchronize with GPS time.
B: While selecting the "NTP" (Network Time Protocol), the device must have network access
connection and assign the NTP IP location. This process runs at 6:30am local time while the
system has network connection;
TIME ZONE: Please choose the correct time zone where vehicle is.
SYNC TIME: This is the time when the unit will sync the system time every day. The method depends on the
setting on the TIME SYNC SOURCE option:
NTP SERVER IP: Input the IP server which supports NTP protocol, in order to allow the system have time
synchronization
"211.22.55.116", "194.88.2.60"]
DST: Daylight Saving Time. If this is set on, the following settings will be available for when DST will take effect.
DST MODE: There are two modes: Auto / Manual.
Auto: According to the international DST, i.e.: valid only between 2AM on Second Sun in March and
2AM on First Sun in NOV.
While setting the DST, the start date must be earlier than the end date.
Scroll to【SAVE】to make the setting valid.
through the network.
18
[Example: "192.43.244.18",
User Manual
"129.6.15.28",