Honda MM60 Operator's Manual page 8

SAFETY INFORMATION
Stop mower and tractor immediately upon
striking an obstruction. Turn off engine, remove
key, inspect and repair any damage before
resuming operation.
Before working underneath, raise mower, install
transport lock and block mower securely.
Hydraulic system leak down and failure of
mechanical or hydraulic system can cause
equipment to drop.
Disengage power to mower, lower mower to
ground, stop engine, set parking brake and
remove key before dismounting tractor.
Maintenance Safety
Always wear relatively tight and belted clothing
to avoid entanglement in moving parts. Wear
sturdy, rough-soled work shoes and protective
equipment for eyes, hands, hearing and head.
Lower mower to ground or block securely, turn
tractor engine off , remove key and disconnect
mower U-joint driveline from tractor PTO before
performing any service or maintenance.
Never perform service or maintenance with
tractor engine running.
Before working underneath, raise mower, install
transport lock and block mower securely.
Hydraulic system leak down and failure of
mechanical or hydraulic system can cause
equipment to drop.
a l l persons away from operator control
Keep
area while performing adjustments, service
maintenance.
Frequently check blades. They should be
sharp, free of nicks and cracks and securely
fastened.
Use a new Nylok blade bolt when you replace
the blade. Do not substitute any bolt for the
special blade bolt. It is self-locking, meeting the
non-loosening requirements for this applica-
tion.
Your dealer supply genuine replacement
can
blades. Substitute blades may not meet original
equipment specifications and may
ous.
Tighten all bolts, nuts and screws, and check
that all cotter pins are installed securely to
ensure mower is in a safe condition before
operating.
6
Ensure all safety decals are installed and in
location drawing.)
Ensure shields and guards are properly in-
stalled and in good condition.
Storage
Block mower securely for storage.
or
danger-
be