Selecting A Ring Tone - ADTRAN Aastra 9133i IP User Manual

If DND is set on a softkey, the key switches DND ON and OFF. If the phone shares a line with other
phones, only the phone that has DND configured is affected.
The second line on the menu of the IP phone shows when DND is configured. When a call comes in on the
line, the caller hears a busy signal or recorded message, depending on the server configuration.

2.13 Selecting a Ring Tone

You can configure ring tones and ring tone sets on the IP phone. There are several distinct ring tones that a
user can select from to set on the IP phones. You can enable and disable these ring tones on a global or per-
line basis.
The following table identifies the valid settings and default values for each type of configuration method.
Configuration Method
IP Phone UI
Aastra Web UI
To configure a ring tone using the IP Phone UI
1 Press Options on the phone to enter the Options List.
2 Select Tones.
3 Select Set Ring Tone.
4 Select the type of ring tone (Tone 1 through Tone 5, or Silent).
18
Table 1. Ring tone settings table
Valid Values
Global:
Tone 1
Tone 2
Tone 3
Tone 4
Tone 5
Silent
Global:
Tone 1
Tone 2
Tone 3
Tone 4
Tone 5
Silent
Per-Line:
Global
Tone 1
Tone 2
Tone 3
Tone 4
Tone 5
Silent
Copyright © 2009 ADTRAN, Inc.
Aastra Model 9133i IP Phone Features
Default Value
Global:
Tone 1
Global:
Tone 1
Per-Line:
Global
619500103-1A