5.9 Optional HP Tablet PC
Docking Station
Optional HP Tablet PC Docking Station Components
Optional HP Tablet PC Docking Station
Docking stand and pivot arm
Top case
Board assembly
Bottom case
Perform the following steps to disassemble the docking station:
1. Position the docking station upside down, resting on the
docking stand, with the bottom case toward you.
2. Remove the 4 TM2.5 × 7.4 screws that secure the top case to
the bottom case.
Removing the Top Case Screws
Maintenance and Service Guide
Spare Part Number Information
Removal and Replacement Procedures
348338-001
349090-001
349091-001
349093-001
349092-001
5–37