HP Compaq tc1100 Maintenance And Service Manual page 199

Power Cord Set Requirements
Country-Specific Requirements
Country
Australia
Austria
Belgium
Canada
Denmark
Finland
France
Germany
Italy
Japan
The Netherlands
Norway
Notes
1. The flexible cord must be <HAR> Type HO5VV-F, 3-conductor, 1.0 mm²
conductor size. Power cord set fittings (appliance coupler and wall plug)
must bear the certification mark of the agency responsible for evaluation in
the country where it will be used.
2. The flexible cord must be Type SPT-3 or equivalent, No. 18 AWG,
3-conductor. The wall plug must be a two-pole grounding type with a NEMA
5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V) configuration.
3. The appliance coupler, flexible cord, and wall plug must bear a "T" mark and
registration number in accordance with the Japanese Dentori Law. The
flexible cord must be Type VCT or VCTF, 3-conductor, 1.00 mm² conductor
size. The wall plug must be a two-pole grounding type with a Japanese
Industrial Standard C8303 (7 A, 125 V) configuration.
B–2
3-Conductor Power Cord
Set Requirements
Accredited Agency
EANSW
OVE
CEBC
CSA
DEMKO
FIMKO
UTE
VDE
IMQ
METI
KEMA
NEMKO
Applicable Note Number
Maintenance and Service Guide
1
1
1
2
1
1
1
1
1
3
1
1