HP Compaq tc1100 Maintenance And Service Manual page 171

Removal and Replacement Procedures
4. Remove the system board shield 1.
5. Disconnect the fan cable from the system board
6. Remove the 3 PM2.0 × 4.5 screws
heat sink to the system board.
7. Lift the system board
will remain resting on the work surface.
Removing the Fan and Heat Sink
Reverse the preceding procedures to install the system board
shield, fan, and heat sink.
5–36
3
4 straight up. The fan and heat sink
Maintenance and Service Guide
2 .
that secure the fan and
5