Configure At-640 To Make Voip Calls; Wan Config - ATCOM AT-640 Quick Start Manual

A A A A T-640 T-640 Quick Start
T-640 T-640 Quick Quick Start Quick Start Start Guide
2 2 2 2 、 、 、 、 Configure
Configure Configure AT-640 AT-640 to to to to make AT-640
Configure AT-640
A A A A 、 、 、 、 WAN
WAN WAN

WAN Config

Config Config Config
Network� � � � WAN
Network WAN
Network Network WAN Config WAN
Enter
AT-640 supports three different IP types: Static IP, Dynamic obtain IP (DHCP)
and PPPoE. You can use either of these IP types to connect the internet.
Use Use Static Static IP: IP:
Use Use Static Static IP: IP:
----Select "Static";
----Enter the AT-640's IP address in the "IP address" field.
----Set the "Net mask", default 255.255.255.0
----Enter the AT-640's upper gateway IP address (for example: Router) in the
"Gateway" field
----Key in the DNS information in the "Primary DNS" and "Alter DNS" fields.
Use Use DHCP: DHCP:
Use Use DHCP: DHCP:
----Select DHCP
If you have a DHCP server in your network, AT-640 will automatically obtain the
network information from your DHCP server.
Use PPPoE: Use Use Use PPPoE: PPPoE: PPPoE:
----Select PPPoE
----Type your PPPoE dialup information in the PPPoE setting fields: PPPoE server
(option), Username and password.
Then the AT-640 will connect to the internet through PPPoE, and automatically
obtain the IP address, Net mask, Gateway, Primary DNS and Alter DNS
information.
ATCOM TECHNOLOGY CO., LIMITED
Guide
Guide Guide
make make VoIP VoIP
make VoIP VoIP calls
Config
Config Config
to set the WAN setting:
calls calls
calls