MAINTENANCE
Shift Cable Adjustment
(SXA)
Shift cable adjustment
is necessary if the shift lever does not operate
smoothly,
does not shift properly into a gear, or does not align with
the numbers beside the lever.
With the shift lever in 2nd gear, check that the lever, throughout
its
free-play
range, is well-centered
on the number "2" on the lever
cover. If adjustment
is necessary:
1. Loosen the lock nuts with a 10 mm wrench, and move the adjuster
up or down as required.
2. Tighten the lock nuts and recheck lever alignment.
3. Start the engine outdoors, and operate the shift lever (release the
drive clutch lever before moving the shift lever). Check that the
transmission
shifts properly, and that the lever is approximately
aligned with the number beside it.
If the transmission
does not shift as it should with correct cable
adjustment,
take the mower to an authorized
Honda servicing
dealer for repair.
58
\ ADJUSTER