Honda Harmony HRM215SXA Owner's Manual page 58

MAINTENANCE
CONTROL CABLE ADJUSTMENTS
Blade Control Cable Adjustment
Measure free play at the top of the lever, while holding the button
down. Free play should be 3/8 - 9116 in (10 - 15 mm). If adjustment
is necessary:
1. Loosen the lock nuts with a 10 mm wrench, and move the adjuster
up or down as required.
2. Tighten the lock nuts and recheck free play.
3. Start the engine outdoors, and operate the blade control lever.
Check that the blade starts when you push the lever forward and
stops quickly when you release the lever.
If the blade does not start or stop as it should, with correct cable
adjustment, take the mower to an authorized Honda servicing
dealer for repair.
BLADE CONTROL
LEVER
\
LOCK
I
56