Front Wheels - Honda HARMONY H2013SDA Owner's Manual

Front Wheels
REMOVAL
1. Place the lawn tractor on a flat, level surface, and set the parking
brake. Block the rear wheels securely.
CIRCLIP
771 IABAACDR
2. Lift and securely support the front end of the lawn tractor. Remove
the dust cap, then use circlip pliers to remove and discard the old
circlip. Remove the flat washer and wheel. Note that there is a
second washer on the inside of the wheel.
INSTALLATION
1. Apply grease to the axle shaft and inside the wheel hub. If the
inside flat washer was removed, install it back on the axle. Install
the wheel and outside flat washer back onto the axle.
2. Install a new circlip. Do not use the old circlip. Circlips have a
round side and a flat side. Install the new circlip with the flat side
out, being careful not to expand the clip too far. Install the
dustcap.
AXLE 1; SIDEa/ROUND SIDE
?lPIACAA.CDR
95