Martin CX-2 User Manual page 17

To set t he mast er
Important! Set only 1 fixture as master (with DIP-switch pin 2 and 10 ON):
errors and damage can occur if there is more than 1 master.
1 Set DIP-switch pins 2 and 10 to ON.
2 Set DIP-switch pins 3, 5, 6, 7, 8, 9, and 11 to OFF.
3 Set DIP-switch pins 1, 4, and 12 ON or OFF, as
desired, to select the options described on page 12.
To set a sl ave
O P T I O N 1 ( S P E C I A L O P T I O N S D I S A B L E D )
1 Set DIP-switch pin 1 to ON.
2 Set pins 2 - 11 to OFF.
3 Set pin 12 ON for longer lamp life or OFF for higher
intensity.
O P T I O N 2 ( S P E C I A L O P T I O N S E N A B L E D )
1 Set DIP-switch 10 to ON.
2 Set pins 1, 2, 3, 4, 5 and 11 to OFF.
3 Set DIP-switch pins 6, 7, 8, 9, and 12 ON or OFF, as
desired, to select the options described on page 12.
CX-2 user manual Operation
ì ë ê é è ç æ å ä ìí ìì ìë
ì ë ê é è ç æ å ä ìí ìì ìë
ì ë ê é è ç æ å ä ìí ìì ìë
17