Using The Configuration Utility - D-Link AirPlus DWL-520+ Manual

•
Select the Wireless
Network. In this case
default Wireless
Network is selected.
•
Click Connect
You have completed the
installation of the DWL-520+.
YOU HAVE COMPLETED THE INSTALLATION OF THE DRIVERS. SEE
NETWORKING BASICS IN THIS MANUAL FOR MORE
INFORMATION ON SETTING UP A NETWORK.
6.

Using the Configuration Utility

If you want to alter the default settings or optimize the performance of the
DWL-520+, D-Link has included a configuration utility to do so.
Note: Out of the box, with its default settings, the DWL-520+ will
associate with D-Link Air / AirPlus wireless routers and access points.
(e.g. DI-713P, DI-714, DWL-900AP+, DWL-1000AP.)
After the computer restarts, the configuration utility will automatically start
and the utility icon will appear in the bottom right hand corner of the screen
(systray).
•
Double-click on the Configuration Utility icon
(Fig. 6.1) shown on the right.
Note: If the utility icon does not appear, double-click on the shortcut icon
(Fig. 6.2) that has been created on your desktop workspace.
After double-clicking on the icon (Fig. 6.1), the D-Link AirPlus
DWL-520+ Utility window will appear.
default
Fig. 5.10
15
Fig. 6.1
Configuration
Fig. 6.2