Using The Configuration Utility - D-Link DWL-AG530 Quick Installation Manual

Appendix (Continued)
Using the Configuration Utility
A. Status: Displays
the MAC address
of the access point
that is associated
with the DWL-
AG530.
E. Encryption:
Displays the current
encryption status
of the wireless
connection.
H. Channel:
Displays the channel
information. By
default, the channel is
set to 6 and selection
is automatically
determined by the
wireless access point
or router.
:
B. SSID The Service
Set Identifier is the
name assigned to the
wireless network. The
factory SSID setting
is set to default.
A
B
C
D
E
F
G
H
I
J
F. Connection
connected or authenticated
information.
I. Link Quality / Signal
Strength:
Displays the Link
Quality for the DWL-AG530
wireless connection to the
access point. The Signal
Strength represents the
wireless signal between the
access point and the DWL-
AG530. The percentage
coincides with the graphical
bar.
C. Frequency:
Displays the
current frequency
used by the current
connection to the
access point.
Info:Displays
9
D. Wireless Mode:
The factory setting is
set to Infrastructure.
Ad-Hoc mode is used
for Peer-to-Peer
networking.
G. Tx Rate:
The default
setting is Auto; meaning,
Tx Rate settings are
automatically determined
by the DWL-AG530
depending on the
distance from the access
point.
J. Packet Count:
Graphically displays
the statistics of data
transmitted and
received.