D-Link DWL-AG530 Quick Installation Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. PCI Card
  5. AirPremier AG DWL-AG530
  6. Quick installation manual

D-Link DWL-AG530 Quick Installation Manual

Airpremier ag dualband, wireless pci adapter
Hide thumbs Also See for DWL-AG530:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual, Manual
This product works with the following
operating system software:
Windows XP, Windows 2000,
Windows ME, Windows 98SE

Before You Begin

You must have at least the following:
•
A desktop computer with an available PCI 2.2, 32-bit, 5 volt PCI slot
•
At least a 500MHz processor and 128MB of memory
•
An 802.11a, 802.11b or 802.11g Access Point (for Infrastructure Mode) or
another 802.11a, 802.11b, or 802.11g wireless adapter (for Ad-Hoc; Peer-to-Peer
networking mode.)
Check Your Package Contents
These are the items included with your DWL-AG530 purchase:
If any of the above items are missing, please contact your reseller.
Insert the D-Link CD Into Your
Desktop PC
Turn on the computer
Insert
Driver CD in the CD-ROM drive.
The step-by-step instructions that follow
are shown in Windows XP. The steps and
screens are similar for the other Windows
operating systems
©2005 D-Link Corporation. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifi-
DWL-AG530 Dualband Wireless PCI Adapter
CD-ROM (containing Drivers, Manual and Warranty)
and
the D- Link AirPremier DWL-AG530
cations subject to change without notice.
DWL-AG530
AirPremier AG™ Dualband
Wireless PCI Adapter into
your computer before
installing the driver
software from the D-Link
CD!
1
Wireless PCI Adapter
Do
NOT
install
the DWL-AG530

Advertisement

Table of Contents
loading

Related Manuals for D-Link DWL-AG530

Summary of Contents for D-Link DWL-AG530

  • Page 1: Before You Begin

    Windows XP. The steps and software from the D-Link screens are similar for the other Windows operating systems ©2005 D-Link Corporation. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifi- cations subject to change without notice.
  • Page 2 Continued... The Install Screen will appear. Click Install Driver If the CD Autorun function does not automatically start on your computer , go to Start > Run and type “D:\Driver\ setup.exe.” If it does start, proceed to the next screen. Type “D:\Driver\setup.exe.”...
  • Page 3 Continued... Click Next Click Next Click Finish Shut down your computer...
  • Page 4 Carefully guide the DWL-AG530 antenna through the PCI bracket opening adjacent to the PCI slot you intend to use for the DWL-AG530. Install the DWL-AG530 carefully, and firmly set it into the available PCI slot (which is typically white or cream-colored).
  • Page 5 Installing the DWL-AG530 Wireless PCI Adapter in Your Computer (cont.) Gently connect the antenna to the antenna stand. Finished! Antenna to wirelessly connect to 802.11a and 802.11b networks Screw Mount Link / Activity LEDs The screw that Antenna Cable Indicates that the card is...

  • Page 6: Restart Your Computer

    Restart Your Computer When you restart your computer Found New Hardware this Wizard (Windows XP) screen will appear: Select Install the software automatically (Recommended) Click Next For Windows XP: This Hardware Installation alert screen may appear after the desktop computer restarts. Click Continue Anyway to finalize the installation...
  • Page 7 Click to finalize the installation. The D-Link driver software for this device is undergoing Windows Logo testing. Microsoft certification is pending. Your Installation is Complete! After you have finished the installation in Windows XP, 2000, Me, or 98SE, the D-Link AirPremier AG DWL-AG530 Configuration Utility will...
  • Page 8 Appendix For Windows XP, if you wish to use the AirPremier AG utility, please do the following steps. Click the XP Networking icon to use the Zero Configuration Wireless Settings. Click Advanced Uncheck “Use Windows to configure my wireless network settings.”...

  • Page 9: Using The Configuration Utility

    DWL-AG530 Link Quality / Signal depending on the Strength: Displays the Link distance from the access Channel: Quality for the DWL-AG530 point. Displays the channel wireless connection to the information. By access point. The Signal default, the channel is...
  • Page 10 Authentication: Wireless Mode: SSID: The Service Set You can specify the The factory setting is Identifier is the name assigned authentication mode set to Infrastructure. to the wireless network. The for the wireless Ad-Hoc mode is used factory SSID setting is set to network.

  • Page 11: Ip Address Configuration

    DWL-AG530. Microsoft Windows XP: Go to Start > Right-click on My Network Places >select Properties > Right-click and select Properties on the Network Connection associated with the DWL-AG530. Click Internet Protocol (TCP/IP) Click Properties Dynamic IP address setup...
  • Page 12 Settings > Network and Dial- up Connections > Right Click and select Properties on the Local Area Connection associated with the DWL-AG530 Click Internet Protocol (TCP/IP) Click Properties Dynamic IP address setup Used when a DHCP server is available on the local network.

  • Page 14: Technical Support

    Technical Support You can find software updates and user documentation on the D-Link websites. D-Link provides free technical support for customers within Canada, the United Kingdom, and Ireland. Customers can contact D-Link technical support through our websites, or by phone.

Table of Contents