D-Link AirPlus DWL-520+ Manual page 41

Networking Basics
Connecting to a Wireless Network
Connecting to a Wireless Network with a Wireless Router or an
Access Point using a DHCP server in Windows 2000.
Select Obtain an IP address
automatically.
Select Obtain DNS server address
automatically.
Click OK
Fig. 8.30
Connecting to a Wireless Network with a Wireless Router or an
Access Point using a static IP address in Windows 2000.
Select Use the following IP
address
Input a static IP Address within the
same IP Address range as the
wireless router or the access point.
192 168 0 1
IP address: 192.168.0.51
Subnet mask: 255.255.255.0
Default Gateway: Enter the LAN IP
address of the Wireless Router
Select Use the following DNS
server address. Leave this section
blank.
Click OK
Fig 8.31
41