Installing The Dwl-520; Installing The Drivers - D-Link AirPlus DWL-520+ Manual

5. Installing the DWL-520+

Before you start, make sure to turn off your computer
Note: To avoid damage caused by static electricity, make sure to properly ground
yourself by first touching a metal part of the computer to discharge any static
electricity before working with the DWL-520+.
Installing the PCI Card
• Remove the back cover of the
computer
• Install the DWL-520+ carefully and
firmly into an available PCI slot
which is usually "white" or "cream"
colored
• Secure the DWL-520+ with a
screw
• Replace the computer's cover

Installing the Drivers

•
Plug in the power cord and turn on your computer
•
The Found New Hardware
Wizard screen appears
•
Insert the Driver CD into
the CD-ROM drive
•
Close the initial Autorun
screen and continue with
the installation
•
Select Install from a list
or specific location
(Advanced)
•
Click Next
Note: If Found New Hardware Wizard does not automatically start, go to
Start > Settings > Control Panel > Add Hardware and follow the
instructions to complete the installation process.
and unplug the power cord.
Fig. 5.2
12
Fig. 5.1
D-Link AirPlus Wireless PCI Adapters