Using The Configuration Utility - D-Link DWL-AG530 Quick Installation Manual

Appendix (Continued)

Using the Configuration Utility

A. Status:
MAC Address of the
Access Point that is
associated with the
DWL-AG530.
D. Wireless Mode:
peer-to-peer networking.
E. Encryption: Displays the current encryption status of the wireless connection.
F. Connection Info:
Displays connected or
authenticated information.
G. TxRate: The default
setting is Auto; meaning,
TxRate settings are
automatically determined
by the DWL-AG530
depending on the
distance from the access
point.
B. SSID
Displays the
Identifier is the name
assigned to the wireless
network. The factory
SSID setting is set to
default.
The factory setting is set to Infrastructure. Ad-Hoc mode is used for
A
B
C
D
E
F
G
H
I
J
H. Channel:
information. By default, the channel is
set to 6. Please note that the DWL-
AG530 will automatically adjust channel
depending on the Access Point.
I. Signal Quality :
AG530 wireless connection to the access point. The
Signal Strength represents the wireless signal be-
tween the access point and the DWL-AG530. The
percentage coincides with the graphical bar.
:
The Service Set
Displays the channel
Displays the Link Quality for the DWL-
9
:
C. Frequency
Displays the
current fre-
quency used
by the adapter.
J. Packet
Count: Graphi-
cally displays
the statistics of
data transmitted
and received.