D-Link AirPlus DWL-520+ Manual page 16

Configuration Utility
Link Info
After clicking on the Configuration Utility icon, the Link Info screen will
display the following.
(Note: the appearance of the following illustrations may be
slightly different on your computer.)
D-Link AirPlus Configuration Utility
Fig. 6.3 This screen shot will be the same for all Windows operating
systems
Status: Displays the MAC Address of the Access Point that is associated
with the DWL-520+.
SSID: The Service Set Identifier is the name assigned to the wireless
network. The factory SSID setting is set to default.
TxRate: The factory setting is set to 11 Mbps; however, TxRate settings are
automatically determined by the DWL-520+ depending on the distance from
the access point.
Channel: Displays the channel information. By default, the channel is set to
6 and selection is automatically determined by the DWL-520+.
Link Quality / Signal Strength: Displays the Link Quality for the DWL-520+
wireless connection to the access point. The Signal Strength represents the
wireless signal between the access point and the DWL-520+. The
percentage coincides with the graphical bar.
Data Rate: Displays the statistics of data transmitted and received.
16