D-Link AirPlus DWL-520+ Manual page 40

Networking Basics
Connecting to a Wireless Network
Connecting to a Wireless Network with a Wireless Router or an
Access Point using a static IP address in Windows XP.
Select Use the following IP address - if the Wireless Router or Access
Point does not have a DHCP server enabled.
Input a static IP address within the same
range as the Wireless Router or Access
Point.
IP address: 192.168.0.51
Subnet mask: 255.255.255.0
Default Gateway: Enter the LAN IP
address of the Wireless Router
Select Use the following DNS server
address. Enter the LAN IP address of
the Wireless Router.
Click OK
Fig. 8.28
Connecting to a Wireless Network in Windows 2000
Go to Start > Settings > Network and
Dial-up Connections > Double click on
D-Link AirPlus DWL-520+ Wireless PCI Adapter
the Local Area Connection associated
with the DWL-520+ > select Properties >
select Internet Protocol (TCP/IP) > click
Properties
Fig. 8.29
40