Table of Contents
Advertisement
ASSEMBLY
Cart Assembly
2. Install the wheel assemblies on the frame,
3/8 x
using eight
1 inch hex bolts, eight
flat washers, and eight
Tighten the nuts and bolts securely.
Lubricate the wheels with multi-purpose
grease. Grease fittings are located at the axles
and at the swivel pivots.
Inflate the tires to
30
3 .
Install the U-bracket on the cart bed, using
three 5/16
inch pan-head screws, three
x 3/4
5/16 inch flat washers, three 5/16 inch lock
washers, and three 511 6 inch nuts.
Tighten the nuts and Screws securely.
5116
314 inch -
inch
3/8
inch lock nuts.
3/8
psi (207 kPa).
x
inch HEX BOLT (8)
1
5/16 Inch
WASHER (3)
NUT (3)
5/16 inch
Turn the cart bed upside down. Install the
4.
frame on the U-bracket, using
inch hex bolts and
two
Tighten the nuts and bolts securely.
NOTICE
Overtightening the nuts and bolts will bend the
frame brackets in which the U-bracket pivots.
5.
HEX BOLT (2)
Turn the cart bed right side up. Install the latch
handle, using one 5/16 x
two 5/16 inch spring washers, two 511
washers, and one 5/16 inch lock nut with nylon
insert.
When installing the hardware, position the
spring washers so the concave sides face
toward the cart box, and the convex, serrated
sides face away from the cart box.
Tighten the nut and bolt to apply enough
pressure that the latch handle will stay in any
position you move it to.
LATCH HANDLE
5/16 inch
SPRING WASHERS
(nylon insert)
two
1/2 x 1-1/4
1/2 inch
lock
nuts.
1-114 Inch
1
6 inch flat
x
Advertisement
Table of Contents
