Advertisement
QuickSpecs
Technical Specifications
Memory and processor
Mounting
Performance
Environment
Electrical characteristics Maximum heat
Safety
Emissions
Management
Services
128 MB SRAM, 16 MB flash; packet buffer size: 4 MB
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
1000 Mb Latency
Throughput
Routing/Switching
capacity
Routing table size
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Acoustic
dissipation
Voltage
Idle power
Maximum power rating
Frequency
Notes
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC
60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J;
NOM; ROHS Compliance
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A; ANSI C63.4 2003;
ETSI EN 300 386 V1.3.3; AS/NZS CISPR22 Class A; EN 61000-3-2; EN 61000-3-3; EN 61000-4-2; EN 61000-
4-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN 61000-4-11; EN 61000-3-2:2006; EN 61000-3-
3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A
IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager
3-year, 4-hour onsite, 13x5 coverage for hardware (UV858E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV861E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UV864E)
3-year, 24x7 SW phone support, software updates (UV867E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR584E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR585E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR586E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV859E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV862E)
DA - 13850 Worldwide — Version 26 — April 15, 2014
< 3.2 µs
71.4 million pps
96 Gbps
32 entries (IPv4)
32°F to 113°F (0°C to 45°C)
10% to 90%, noncondensing
-40°F to 158°F (-40°C to 70°C)
5% to 95%, noncondensing
ISO 7779
375 BTU/hr (395.63 kJ/hr)
100-240 VAC
54 W
110 W
50/60 Hz
Idle power is the actual power consumption of the device with no ports
connected.
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
HP 5120 EI Switch Series
Page 23
Advertisement
