Cisco UCS C24 Installation And Service Manual page 67

Chapter 3 Maintaining the Server
Figure 3-13
Heatsink screws (four)
1
Heatsink
2
CPU retaining latch
3
Remove a protective cap or an old CPU from the socket (if present):
Step 2
If you are removing an old CPU, skip to
•
If you are installing a new CPU to a socket that was shipped empty, the socket has a protective cap
•
that is intended to prevent bent contact pins. Use the tool as shown in
protective cap and then pivot to remove the cap.
Figure 3-14
OL-26647-01z
CPU Socket Latches
1
2
Protective Cap Removal Tool
Installing or Replacing Server Components
Hinged CPU cover plate
4
CPU
5
Step 3.
Cisco UCS C24 Server Installation and Service Guide
Figure 3-14 to grasp the
3-27