Cisco UCS C24 Installation And Service Manual page 64

Installing or Replacing Server Components
Note
Align the new DIMM with the empty slot on the motherboard. Use the alignment key in the DIMM
a.
slot to correctly orient the notch on the bottom edge of the DIMM.
Push down evenly on the top corners of the DIMM until it is fully seated and the ejector levers on
b.
both ends lock into place.
Replace the plastic air baffle over the DIMM slots.
c.
Replace PCIe riser 1 to it slot. See
d.
Replace the top cover.
e.
Replace the server in the rack, replace cables, and then power on the server by pressing the Power
f.
button.
Cisco UCS C24 Server Installation and Service Guide
3-24
Before installing DIMMs, refer to the population guidelines. See
Guidelines and Population Rules, page 3-20.
Replacing a PCIe Riser, page
Chapter 3 Maintaining the Server
Memory Performance
3-33.
OL-26647-01