Chapter 2 Installing The Server - Cisco UCS C24 Installation And Service Manual

Unpacking and Inspecting the Server
Unpacking and Inspecting the Server
When handling internal server components, wear an ESD strap and handle modules by the carrier edges
Caution
only.
Keep the shipping container in case the server requires shipping in the future.
Tip
The chassis is thoroughly inspected before shipment. If any damage occurred during transportation or
Note
any items are missing, contact your customer service representative immediately.
To inspect the shipment, follow these steps:
Remove the server from its cardboard container and save all packaging material.
Step 1
Compare the shipment to the equipment list provided by your customer service representative and
Step 2
Figure
Check for damage and report any discrepancies or damage to your customer service representative. Have
Step 3
the following information ready:
•
•
•
•
Figure 2-1
1
2
Cisco UCS C24 Server Installation and Service Guide
2-2
2-1. Verify that you have all items.
Invoice number of shipper (see the packing slip)
Model and serial number of the damaged unit
Description of damage
Effect of damage on the installation
Shipping Box Contents
1
PCIe 4
PSU 2
PCIe 5
PSU 1 PSU 1 PSU 1
Server
Power cord (optional, up to two)
PCIe 3 PCIe 1
PCIe 2
3
2
Documentation
3
–
Chapter 2 Installing the Server
OL-26647-01