Table of Contents
Advertisement
Life Fitness 9100/9500HR Belt Drive Stairclimbers
How To
REMOVE AND REPLACE DISPLAY CONSOLE
...
Tool Required: Phillips screwdriver
Step 1
Turn the power off, then disconnect the power cord from the outlet.
Step 2
Remove SCREWS securing DISPLAY CONSOLE to BRACKET.
Do not allow DISPLAY CONSOLE to fall.
4-Pin Square
12- Pin Connector
4-Pin Flat
NOTE: Upon replacement, tighten screws in diagonal ("X") pattern. Do not excessively tighten screws.
Incorrect tightening may damage console housing. Non models fitted with rubber pad, tighten screws
sufficiently to slightly compress pad.
Step 3
Lift-off DISPLAY CONSOLE to access wire harness PIN CONNECTORS as necessary. Note location, quantity and,
shape of connectors.
10
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
