Manual Relief Valve; Engine Cover Removal And Installation - Honda Outboard Motor BF200A Owner's Manual

SERVICING YOUR OUTBOARD MOTOR
MANUAL RELIEF VALVE
MANUAL RELIEF VALVE
NUAL
release)
The outboard motor can be tilted
manually after opening the manual
relief valve. This feature enables the
outboard motor to be tilted or
lowered when no battery is connected.
For manual tilting, use a screwdriver
to turn the valve counterclockwise 1
or 2 turns. Close the valve firmly
after positioning the outboard motor.
Be sure the valve is closed before
operating the outboard motor. If the
valve is not closed, the outboard
motor will tilt up when operated in
reverse.
58
ENGINE COVER REMOVAL
AND INSTALLATION
k
ENGINE COVER
The engine cover latch fastens the
engine cover to the outboard motor.
To remove the engine cover, pull the
engine cover latch to the unlocked
position, then lift the engine cover
straight up from the outboard motor.
To
install the engine cover, place the
cover on the outboard motor, and
push down evenly.