Flashing Prompt Goes Off When Start Button Is Released - Life Fitness Lifecycle 3500 Series Service Manual

Hide thumbs Also See for Lifecycle 3500 Series:
Table of Contents

Advertisement

TROUBLESHOOTING GUIDE
Symptom: FLASHING PROMPT GOES OFF WHEN START BUTTON IS RELEASED
Symptom
Flashing prompt goes off
when start button is
released
14
Probable Cause
Workout level too low
Not Pedaling at 80 RPMs
Drive belt too loose
Chain too loose
Loose wire connections
Damaged wire harness
Defective Display Console
Defective Alternator Control
Board
Alternator has incorrect
voltage output
Defective Alternator
Corrective Action
q
Choose higher workout level
q
Pedal at 80 RPMs
q
Tighten drive belt
q
Replace chain
q
Reseat connectors at Display Console,
Alternator Control Board, Alternator and
Battery
q
Check wire harness for damage
q
Switch Display Consoles
q
Switch Alternator Control Board
q Check Alternator output. Should be
9-10V. Red probe on output, Black probe
on ground. Pedal and press Start.
q Switch Alternator
For Assistance Call:
Life Fitness Customer Support Services
1-847-451-0036 or 1-800-351-3737

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lifecycle 4500 seriesLifecycle 5500 series

Table of Contents