Life Fitness LIFECYCLE 5500 Operation Manual
Life Fitness LIFECYCLE 5500 Operation Manual

Life Fitness LIFECYCLE 5500 Operation Manual

Life fitness exercise bike user manual
Hide thumbs Also See for LIFECYCLE 5500:

Advertisement

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LIFECYCLE 5500 and is the answer not in the manual?

Questions and answers

Monika
March 11, 2025

When I push start nothing happens. Life cycle 5500

User image 67cf8ab35d5f8
1 comments:
Mr. Anderson
March 11, 2025

The Life Fitness Lifecycle 5500 may not start when the button is pressed due to the following reasons:

1. Workout level too low – Choose a higher workout level.
2. Not pedaling at 80 RPMs – Pedal at 80 RPMs.
3. Drive belt too loose – Tighten the drive belt.
4. Chain too loose – Replace the chain.
5. Loose wire connections – Reseat connectors at the Display Console, Alternator Control Board, Alternator, and Battery.
6. Damaged wire harness – Check the wire harness for damage.
7. Defective Display Console – Switch Display Consoles.
8. Defective Alternator Control Board – Switch the Alternator Control Board.
9. Alternator has incorrect voltage output – Check that the Alternator output is 9-10V.
10. Defective Alternator – Switch the Alternator.

These troubleshooting steps can help diagnose and resolve the issue.

This answer is automatically generated

Subscribe to Our Youtube Channel

Table of Contents

Save PDF