Connecting To A Computer - Sanyo PLC-XE45 Owner's Manual

Installation

Connecting to a Computer

Cables used for connection
• VGA Cables (Mini D-sub 15 pin)*
• USB Cable
• Audio Cables (Mini Plug: stereo)
(*One cable is supplied; other cables are not supplied with the projector.)
Audio Output
Audio cable
(stereo)
✔Note:
•Input sound to the COMPUTER/COMPONENT AUDIO IN
terminal when using the COMPUTER IN 1/COMPONENT
IN and the COMPUTER IN 2/MONITOR OUT terminal as
input.
•When the AUDIO OUT is plugged-in, the projector's
built-in speaker is not available.
•When the cable is of the longer variety, it is advisable to
use the COMPUTER IN 1/COMPONENT IN and not the
COMPUTER IN 2 /MONITOR OUT.
•See page 66 for ordering optional cables.
14
USB port Monitor Output
USB cable VGA cable
COMPUTER IN 1/
USB
COMPONENT IN
COMPUTER IN 1
USB SERVICE PORT
RESET
/ COMPONENT IN
COMPUTER/
COMPONENT
AUDIO IN
ON ON
Monitor Output
or
Monitor Input
VGA cable
COMPUTER IN 2/
MONITOR OUT
This terminal is switchable. Set up the
terminal as either Computer input or
Monitor output (see page 44).
(VARIABLE)
AUDIO OUT
R
COMPUTER IN 2 /
MONITOR OUT
COMPUTER /
L
VIDEO IN
COMPONENT
(MONO)
S-VIDEO IN
AUDIO IN
Unplug the power cords of
both the projector and external
equipment from the AC outlet
before connecting the cables.
External Audio Equipment
Audio Input
Audio cable
(stereo)
AUDIO OUT
(stereo)