Turning Off The Projector - Sanyo PLC-XE45 Owner's Manual

Turning Off the Projector

1
Press the POWER ON-OFF button on the remote
control, and "Power off?" appears on the screen.
2
Press the POWER ON-OFF button again to turn off the
projector. The POWER indicator starts to blink red, and
the cooling fans keep running. (You can select the level
of the fans' quietness and running speed. See page
49.) At this time you can unplug the AC power cord
even if the fans are still running.
3
When the projector has cooled down enough to be
turned on again, the POWER indicator stops blinking.
TO MAINTAIN THE LAMP LIFE, ONCE YOU TURN
THE PROJECTOR ON, WAIT AT LEAST 5 MINUTES
BEFORE TURNING IT OFF .
DO NOT OPERATE THE PROJECTOR
CONTINUOUSLY WITHOUT REST. CONTINUOUS
USE MAY RESULT IN SHORTENING THE LAMP
LIFE. TURN OFF THE PROJECTOR AND LET STAND
FOR ABOUT AN HOUR IN EVERY 24 HOURS.
✔Note:
•When the On start function is "On, " this projector is
turned on automatically by connecting the AC power cord
to an AC outlet (p. 46).
•The running speed of cooling fans is changed according
to the temperature inside the projector.
•Do not put the projector in a case before the projector is
cooled enough.
•If the WARNING indicator blinks or emits a red light, see
"Warning Indicator" on page 50.
•While the POWER indicator is blinking, the lamp is being
cooled down and the projector cannot be turned on. Wait
until the POWER indicator stops blinking to turn on the
projector again.
•The fan rotation will terminate directly if the AC power
cord is unplugged immediately after the projector is
turned off.
•The projector can be turned on after the POWER indicator
turns red. The waiting time to restart will be shortened
when the normal power-off processing for fan cooling is
completed, compared with the time the AC power cord is
immediately unplugged after the power-off.
"Power off" disappears after 4 seconds.
Basic Operation
19