Top Panel; Antitheft Alarm Setting Buttons - Sanyo PLC-XE45 Owner's Manual

Part Names and Functions

Top Panel

Antitheft Alarm Setting Buttons

q
10
q w e
POWER WARNING LAMP REPLACE
e
w
POWER indicator
q
It turns red when the projector is in the stand-
by mode.
It remains green while the projector is under
operation.
(pp. 19, 20, 63)
WARNING indicator
w
Emit a red light when the projector detects
abnormal condition. This also blinks red when
the internal temperature of the projector
exceeds the operating range. (pp. 53, 63)
LAMP REPLACE indicator
e
Turn yellow when the life of the projection lamp
draws to an end. (pp. 56, 63)
These buttons are used for Antitheft alarm function.
(pp. 50-52)
F button
q
Used for Antitheft alarm setting.
Button 1-3
w
Used for Antitheft alarm setting.
ALARM indicator
e
Blinks red to indicate the battery condition or
key operation.