Wohler AMP2-SDA/AVU User Manual page 5

2u digital audio speaker monitor
Table of Contents

Advertisement

AMP2-SDA/AVU and AMP2-SDA/APP User Manual P/N 821576 Rev-A
The AMP2-SDA/AVU and AMP2-SDA/APP are ideally suited for use in VTR bays, mobile production vehicles, teleconferencing
installations, multimedia systems, satellite links and cable TV facilities, and on-air radio studios. Designed and manufactured in the U.S.,
both models are backed by a strong warranty and a satisfaction guaranteed return policy.
Units are designed to meet, at time of manufacture, all currently applicable product safety and EMC requirements, such as those of
CE. 0 dbV ref. 0.775V RMS. Features and specifications subject to improvement without notice.
General Specifications
Input Connectors:
Analog Input Impedance:
Digital Input Impedance:
Peak Acoustic Out (@ 2 ft.):
Power Output,
RMS Each Side (4Ω Ω Ω Ω Ω ):
RMS Bass (4Ω Ω Ω Ω Ω ):
Frequency Response,
Sixth Octave:
Input Level for Maximum
Output (Volume Full On):
Hum and Noise (analog):
Distortion, Electrical:
Distortion, Acoustic:
Input Overload:
Converted Analog Out S/N:
Converted Analog Out THD:
Magnetic Shielding:
Power Consumption
(Average Maximum):
AC Mains Input:
NOTE: See page 19 for SDI specifications and page 20 for AES specifications.
Physical Specifications
Weight:
Dimensions (HxWxD):
Audio Response Curve
+10
0
d
-10
B
-20
-30
20
50
100
200
Typical 1/6 Octave Audio Response Curve
© 2004 Wohler Technologies Inc. ALL rights reserved
Applications
SDI: BNC, AES: BNC, Analog: XLR
XLR: 40K Ω, balanced
BNC: 75 Ω, unbal., XLR: 110 Ω, bal.
104 dB SPL
14 W transient / 10 W continuous
35 W transient / 25 W continuous
80 Hz - 16 kHz ± 5 dB)
(-10 dB @ 40 Hz, 20 kHZ)
0 dBv balanced / -10 dB unbalanced
Better than -68 dB below full output
Less than 0.15% at any level below
input threshold
6% or less at worst case frequencies
above 120 Hz, including cabinet
resonance; typically less than 1.5%
+26 dBv balanced
>90 dB
<0.008%
<0.8 Gauss any adjacent surface
45 W
100-240VAC, 50-60 Hz Universal
18 lbs. (8.2 kg)
3.5 x 19 x 12 inches
(89 x 483 x 305 mm)
500
1k
2k
Hz
Section 1: Features, Specs, and Installation
5k
10k
20k
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Amp2-sda/app

Table of Contents