Table of Contents
Advertisement
Installation
Emulation Mode Selection (CD and MD changer emulation)
MD Changer Emulation Mode programming steps:
@
Properly install the unit.
@
Put both programming switches in the "DOWN" position.
@
Put ignition switch into the "ACC" position.
@
Wait for a long beep followed by a few short beeps. This may take up to one minute.
@
Return programming switches into their default position (both switches "UP"). Wait up to 30 seconds until
confirmation beep.
@
Put ignition switch into the "OFF" position. Wait at least 10 seconds.
@
Put ignition switch into the "ACC" or "ON" position.
@
Check SoundLinQ3 for functionality, especially TEXT capabilities.
1 2
ON
Ignition into
"ACC" or "ON"
Both switches
position
"DOWN"
CD Changer Emulation Mode programming steps:
@
Properly install the unit.
@
Put "Right" programming switch in the "DOWN" position.
@
Put ignition switch into the "ACC" position.
@
Wait for a long beep followed by a few short beeps. This may take up to one minute.
@
Return programming switches into their default position (both switches "UP"). Wait up to 30 seconds until
confirmation beep.
@
Put ignition switch into the "OFF" position. Wait at least 10 seconds.
@
Put ignition switch into the "ACC" or "ON" position.
@
Check SoundLinQ3 for functionality, especially TEXT capabilities.
1 2
ON
Ignition into
"ACC" or "ON"
Right switch
position
"DOWN"
IMPORTANT
!
Improper Emulation Mode setting may cause unit to be unrecognized by head unit.
!
By activating "CD or MD Changer Emulation Mode" you force the unit to find proper location in the vehicle
Audio/Video network.
Mounting unit using Velcro fasteners
NOTE
!
Velcro Fasteners are not included
!
VAIS Technology strongly recomand to ground unit to the car chassis for best results
1 2
ON
Both switches
Confirmation beep
"UP"
(Red LED blinks)
Both switches
Confirmation beep
(Red LED blinks)
SoundLinQ3
"Hard" Velcro Fastener
"Soft" Velcro Fastener
Carpet or car chassis
up to 30 sec
Confirmation beep
(Red LED blinks)
1 2
ON
up to 30 sec
Confirmation beep
"UP"
(Red LED blinks)
7
Ignition into
"OFF" position
up to 10 sec
Ignition into
"OFF" position
up to 10 sec
Advertisement
Table of Contents
