Table of Contents
Advertisement
Satellite Radio controls
MANUAL TUNING
Use the TUNE knob on the head unit to select channels. You can rapidly scan channels by turning the knob faster in the
direction you wish to scan.
CHANNEL SEEK
TRACK+
TRACK-
and
Use the SEEK-TRACK button on the stereo head unit to select the next available channel. The unit will automatically
skip channels that are not available.
CHANGING CATEGORIES
TYPE
TYPE
and
To change the category of channels you would like to listen to, press either the TYPE < or TYPE > button.
DISPLAYING SONG TITLE AND ARTIST NAME
To display the song title and artist name that is currently playing, press the TEXT button. If the information is available
from the current satellite channel, it will be displayed. Song title and artist name can display a maximum of 16
alphanumeric characters each.
SELECTING PRESETS
To select a preset, press the desired preset button.
TYPE SCAN
Scan channels throughout the selected category.
Displayed Messages/Errors
-ANTENNA-
Antenna not connected or inoperable
-NO SIGNAL-
No signal or acquiring satellite signal
Satellite receiver is not connected or does not respond
-TUNER ERR-
Presets
Adding a new PRESET
@
Select the desired channel
@
Press and hold the preset button where you would like to store the current channel.
@
You will hear a beep when the channel has been stored in the preset location.
NOTE: Beep indicates successfully accomplished operation. If you do not hear a beep, please repeat the above steps.
Changing an existing PRESET
@
Presets can be overwritten at any time using the same procedure as adding a new Preset.
Erasing PRESETS
@
Presets can not be erased, but they can be overwritten at any time by following the procedure for Adding a new
Preset.
SAT Radio Emulation
11
Advertisement
Table of Contents
