Table of Contents
Advertisement
Satellite Radio controls
Presets
Adding a new PRESET
@
Select the desired channel
@
Press the [RPT] or [REPEAT] button 4 times (MUST BE DONE within 1-2 seconds). You will hear a beep.
@
SoundLinQ3 will store the current channel in the preset list. You can store up to 10 preset channels, and channels get
recorded in sequential order.
NOTE: Beep indicates successfully accomplished operation. If you do not hear a beep, please repeat the above steps.
Changing an existing PRESET
@
Select
the
preset you would like to change
@
Select new desired channel (using the [TRACK+], [TRACK-] buttons, or use "Direct entry" on the Navigation screen
(if supported). Make sure you do not select channels which already exist in "Presets list", because unit will move to
another preset.
@
Press the [RPT] or [REPEAT] button 4 times (MUST BE DONE within 1-2 seconds). You will hear a beep.
@
SoundLinQ3 will update the preset list.
NOTE: Beep indicates successfully accomplished operation. If you do not hear a beep, please repeat the above steps.
Erasing PRESETS
@
Enter into "Satellite Radio Input Settings" Mode
@
Press the [DISC RAND] or [DISC RANDOM] button one time to activate the "DISC RANDOM" function.
@
Press the [DISC RAND] or [DISC RANDOM] button again to deactivate it.
@
SoundLinQ3 will produce a long beep as an confirmation of successful erasure.
@
Exit "Satellite Radio Input Settings" Mode ( See "Satellite Radio Input Settings" for details)
Satellite Radio Input Settings
Enter/Exit "Satellite Radio Input Settings" Mode
@
Press the [SCAN] button 8 times (MUST BE DONE within 1-2 seconds) to enter "Satellite Radio Input Settings" Mode.
You will hear a short beep as a confirmation.
@
SoundLinQ3 will use the "REPEAT" indicator (continuous blinks 2 times per second) on your head unit to confirm
"Satellite Radio Input Settings" Mode is active.
@
Press the [SCAN] button 8 times (MUST BE DONE within 1-2 seconds) to exit "Satellite Radio Input Settings" Mode.
You will hear a short beep as a confirmation.
NOTE: In this mode you can setup Display Settings, Erase PRESETS list, and Adjust Sound Level for Satellite Radio
Input.
Tuner Radio ID
(using the [DISC+], [DISC-] buttons)
( See "Satellite Radio Input Settings" for details)
Select Channel 255
Tuner "RADIO ID"
CD/MD Changer Emulation
15
Advertisement
Table of Contents
