Vais Technology SoundLinQ3 SL3sat Owner's Manual page 14

Audio interface controller with built-in siriusxm satellite radio interface
Hide thumbs Also See for SoundLinQ3 SL3sat:
Table of Contents

Advertisement

Satellite Radio controls
You must set the correct Display Mode, in order to display channel number and TEXT information correctly.
( See "Satellite Radio Input Settings" for details).
TRACK+
TRACK-
and
Select Next/Previous channel (if the selected channel is not available, the unit will jump to the next available channel).
and
Speed channel selection +10, -10 (if the selected channel is not available, the unit will jump to the next available channel).
If "DISC SCAN" mode is activated [SCROLL] buttons work as [DISC+] and [DISC-]*.
NOTE: Available only if PRESET CHANNELS are setup. This feature was created for vehicles which do not have
[DISC+], [DISC-] buttons.
DISC+
DISC-
and
Used for PRESET CHANNEL selection.
NOTE: Assumed at least one PRESET CHANNEL exists (see "Presets").
NOTE: If PRESET CHANNEL list has not been previously set [DISC+] and [DISC-] work as [SCROLL] buttons.
SCAN
Used for setup purposes. (Please refer to "Display settings and Special Features").
DISC SCAN
Please see SCROLL buttons functionality.
NOTE: Buttons [DISC RPT], [RANDOM], [DISC RANDOM] are NOT Supported.
IMPORTANT
DISC RPT
To select whether Song Name or Artist Name displays first. We recommend using this feature especially for cars where
Radio is not integrated into Navigation Screen.
Displayed Errors (available only with CD-Text or MD-Text capability)
-ANTENNA-
Antenna not connected or inoperable
-NO SIGNAL-
No signal or acquiring satellite signal
Satellite receiver is not connected or does not respond
-TUNER ERR-
Direct Entry Mode
SoundLinQ3 supports "Direct Entry Mode" only for vehicles with Radio integrated into Navigation System.
NOTE: Direct input isn't available for Radio with its own LCD Display
If you select a channel higher than 299 this unit will direct you to the channel according to the following example.
Example: If you select channel 567, the system will select channel 67. If channel 67 is not available the unit will switch to
channel 1.
(SCROLL)
CD/MD Changer Emulation
Simply touch numeric
buttons to enter channel
number in "Direct entry mode"
14

Advertisement

Table of Contents
loading

Table of Contents