Vais Technology SoundLinQ3 SL3sat Owner's Manual page 10

Head Unit Controls
Source Selection (SAT Emulation)
Select desired source by pressing the AM button on the head unit or MODE on the steering wheel control.
(See diagram below)
Head Unit:
To switch between unit sources, press the AM button on the head unit. The AM button will cycle through the following
modes: AM radio, SAT1, SAT2, and SAT3. SAT1, SAT2 and SAT3 are presets for the satellite receiver.
Steering Wheel control:
To switch between unit sources, press the MODE button on the steering wheel control. The diagram below shows the
order in which sources are selected.
(Diagram below assumes following sources are present).
AM
AM SAT1 SAT2
SAT Radio
SAT1 SAT2 SAT3
SAT Radio
SAT3 FM1 FM2
SAT Radio Emulation
TAPE CD
10