Related Manuals for Vais Technology SoundLinQ3
Summary of Contents for Vais Technology SoundLinQ3
- Page 1 Owner’s Manual Bluetooth Interface Adapter for iOS, Android, and other devices with Bluetooth Streaming capabilities. Copyright (C) 2003-2014 VAIS Technology Feb 12, 2014...
-
Page 2: Before You Start
Before You Start WARNING DO NOT DISASSEMBLE OR ALTER Doing so may result in an accident, fire or electric shock. Do not block your view Do not mount product or any added audio and/or video equipment where it can block your view through the windshield or your view of dashboard indicators and displays. - Page 3 If you leave it inside the vehicle on a hot or cold day. For further information please refer to the iPod/iPhone specifications. VAIS Technology accepts no responsibility for loss of data on the iPod/iPhone, even if that data is lost while using this unit About iPod Operation The iPod/iPhone is charging as long as it’s connected to the unit and the vehicle’s ignition is “ON”...
- Page 4 Connections Connecting SoundLinQ3 SoundLinQ3 Interface Adapter Model SL3B SoundLinQ3 12-pin Audio Harness (36”) SoundLinQ3 20-pin Audio Harness (36”) Mode Bluetooth Service Programming Module Port switch USB Port Audio (Charging ONLY) Harness...
- Page 5 Connections Connecting SoundLinQ3 to head unit using 20-pin Y-harness Head Unit (Radio Receiver) 20-pin connector Lexus GX 470 Radio Receiver shown as an example. Locate connector “A” (20-pin connector) on your Radio. Plug into Connector location on the Radio may be Head Unit different from shown above.
-
Page 6: Installation
Setup proper Emulation Mode for this unit (see “Emulation Mode Selection”) Turn the car on and check SoundLinQ3 functionality and (especially Text capability) before the final assembly. Make sure your iPod has at least two playlists, in order for this unit to operate properly. - Page 7 “UP” (Red LED blinks) Mounting unit using Velcro fasteners SoundLinQ3 “Hard” Velcro Fastener “Soft” Velcro Fastener Carpet or car chassis NOTE Velcro Fasteners are not included VAIS Technology strongly recomand to ground unit to the car chassis for best results...
-
Page 8: Bluetooth Connection
Bluetooth Connection Connecting Android Device to SL3B On the Home screen, press the Menu key. Touch Settings Touch Wireless & networks Touch Bluetooth to turn it On Touch Bluetooth settings Touch Scan for devices (make sure your headset is in pairing mode). Your phone scans for available Bluetooth devices (SL3B:XX:XX) Touch the Bluetooth device (SL3B:XX:XX) to select it Touch the device name again to connect to it. -
Page 9: Special Feature
Special Feature IMPORTANT Important Please Read! (1) After a delay of five seconds, this product will automatically bypass the automobile manufacturer's on-screen warnings concerning use of the onboard navigation system. These warnings are: ”Caution, Drive safely and obey traffic rules. Watching this screen while vehicle is in motion can lead to a serious accident. -
Page 10: Source Selection
Head Unit Controls CD/MD Changer Emulation Source Selection Select desired source by pressing DISC button on the head unit or MODE on the steering wheel control. (See diagram below) Head Unit: To switch between the unit sources you need to use “DISC” or “CD” button on the radio (Diagram below assumes factory CD changer is present). - Page 11 iOS Devices controls iOS Devices controls CD/MD Changer Emulation CD/MD Changer Emulation NOTE: Folder/Disc Title information may not display properly if song selected directly from the iOS device. Some applications may not refresh Folder/Disc Title when the song changes. TRACK+ TRACK+ TRACK- TRACK-...
- Page 12 Android Devices controls CD/MD Changer Emulation NOTE: Functionality such as track information display and controls must be supported by connected device and selected application. TRACK+ TRACK- Select the desired track (Maximum number of tracks is 99 for CD changer Emulation mode, 999 for MD changer Emulation mode). You can fast switch through tracks by repeatedly pressing the [TRACK+] / [TRACK-] button.
- Page 13 Head Unit Controls CD-MP3 Changer Emulation Source Selection Select desired source by pressing DISC button on the head unit or MODE on the steering wheel control. (See diagram below) Head Unit: To switch between the unit sources you need to use “DISC” or “CD” button on the radio (Diagram below assumes factory CD changer is present).
- Page 14 iOS Device controls CD-MP3 Changer Emulation NOTE: Folder/Disc Title information may not display properly if song selected directly from the iOS device. Some applications may not refresh Folder/Disc Title when the song changes. TRACK+ TRACK- Select the desired track (Maximum number of tracks is 999 for CD-MP3 changer Emulation mode). You can fast switch through tracks by repeatedly pressing the [TRACK+] / [TRACK-] button.
- Page 15 Android Device controls CD-MP3 Changer Emulation NOTE: Functionality such as track information display and controls must be supported by connected device and selected application. TRACK+ TRACK- Select the desired track (Maximum number of tracks is 99 for CD changer Emulation mode, 999 for MD changer Emulation mode). You can fast switch through tracks by repeatedly pressing the [TRACK+] / [TRACK-] button.
- Page 16 Additional iOS Features Internet Radio / Third party Music Players Support for iOS 5.1+ devices IMPORTANT To play Internet Radio or Third party Music Player applications (iOS 5.1+ device required): 1. Connect iPod/iPhone. 2. Let the iPod/iPhone “built-in” player to start playing. 3.
-
Page 17: Additional Controls
Additional controls Settings Mode Enable/Disable “Settings mode”- press the [SCAN] button 8 times (MUST BE DONE within 1-2 seconds). You will hear a long beep. Sound Level Adjustment Enable “Settings mode” Start playing desired song by pressing the [Play/Pause] button on the connected BT Audio Device Activate “SCAN”... -
Page 18: License Agreement
For Most Toyota/Lexus Vehicles 2001-2009; (hereinafter collectiv ely referred to as ‘PRODUCTS’). THIS IS A LEGAL AGREEMENT BETWEEN YOU, AS THE END USER, AND VAIS TECHNOLOGY, LLC (“VAIS”). PLEASE CAREFULLY READ THE TERMS AND CONDITIONS OF THIS AGREEMENT BEFORE USING THE VAIS PRODUCTS. BY USING THE VAIS PRODUCTS AND SOFTWARE INSTALLED ON THE VAIS PRODUCTS, YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS AGREEMENT. - Page 19 A COPY OF THE ‘OPERATIONAL WARNINGS AND SAFETY INSTRUCTIONS’ IS TO BE KEPT WITH THE VEHICLE AT ALL TIMES. 3.DISCLAIMER AND LIMITATION OF WARRANTIES . (A) EXCEPT AS OTHERWISE CONTAINED HEREIN , the PRODUCTS and related documentation are provided to you, “AS IS”. IN NO EVENT SHALL VAIS BE LIABLE FOR ANY DAMAGES, CLAIM OR LOSS INCURRED BY YOU (INCLUDING WITHOUT LIMITATION, COMPENSATORY, INCIDENTAL, INDIRECT , SPECIAL, CONSEQUENTIAL, OR EXEMPLARY DAMAGES, LOST PROFITS, LOST SALES OR BUSINESS, EXPENDITURES, INVESTMENTS, OR COMMITMENTS IN CONNECTION WITH ANY BUSINESS, LOSS OF...
-
Page 20: Limited Warranty
B. WHAT YOU MUST DO. To obtain warranty performance, you must take the PRODUCTS, or deliver the PRODUCTS freight prepaid, to a VAIS Technology Authorized Service Center. If shipped, the PRODUCTS must be packaged so that it is protected from possible shipping damage. VAIS Technology will ship the PRODUCTS to you when warranty performance is completed. -
Page 21: Other Provisions
VAIS Technology, concerning the Products, and your purchase hereund er, and supercede all statements or other agreements, whether oral or written, between you and VAIS Technology. No change in this Agreement shall be effective, unless agreed to in writing by bot h, you, the end-user and VAIS.