Safety Warnings - Thecus N5500 User Manual

Safety Warnings

For your safety, please read and follow the following safety warnings:
Read this manual thoroughly before attempting to set up your N5500.
Your N5500 is a complicated electronic device. DO NOT attempt to repair it
under any circumstances. In the case of malfunction, turn off the power
immediately and have it repaired at a qualified service center. Contact your
vendor for details.
DO NOT allow anything to rest on the power cord and DO NOT place the
power cord in an area where it can be stepped on. Carefully place connecting
cables to avoid stepping or tripping on them.
Your N5500 can operate normally under temperatures between 0°C and
40°C, with relative humidity of 20% – 85%. Using the N5500 under extreme
environmental conditions could damage the unit.
Ensure that the N5500 is provided with the correct supply voltage (AC 100V
~ 240V, 50/60 Hz, 3A). Plugging the N5500 to an incorrect power source
could damage the unit.
Do NOT expose the N5500 to dampness, dust, or corrosive liquids.
Do NOT place the N5500 on any uneven surfaces.
DO NOT place the N5500 in direct sunlight or expose it to other heat sources.
DO NOT use chemicals or aerosols to clean the N5500. Unplug the power
cord and all connected cables before cleaning.
DO NOT place any objects on the N5500 or obstruct its ventilation slots to
avoid overheating the unit.
Keep packaging out of the reach of children.
If disposing of the device, please follow your local regulations for the safe
disposal of electronic products to protect the environment.
3