Dhcp Server Configuration; Samba / Cifs - Thecus N4100PRO User Manual

LAN Configuration
Item
MAC Address
Jumbo Frame Support
IP
Netmask
NOTE

DHCP Server Configuration

A DHCP server can be configured to assign IP addresses to devices connected to the
LAN port. To configure these ports, choose LAN from the System Network menu.
DHCP Configuration
Item
DHCP Server
Start IP
End IP
DNS Server
NOTE
WARNING

Samba / CIFS

There are 4 options is currently allow Admin to Enable/Disable to operate N4100PRO
associated with Samba / CIFS protocol. With the option changed, it will need to
reboot system to activate.
Description
Displays the MAC address of the LAN interface.
Enable or disable Jumbo Frame Support on the LAN interface.
Specifies the IP address of the LAN interface.
Specifies the Network Mask of the LAN interface.
Before enabling Jumbo Frame Support, please make sure your network equipment
supports Jumbo Frame. If your equipment is incompatible, you might not be able to
connect to your N4100PRO.
Description
Enable or disable the DHCP server to automatically assign IP
address to PCs connected to the LAN interface.
Specifies the starting IP address of the DHCP range.
Specifies the ending IP address of the DHCP range.
Displayed the DNS server IP address.
The IP Segment of WAN and LAN should not overlap.
The IP address of the LAN interface should not be in the range of the Start
IP address and End IP address.
36