Upgrading System Firmware; Change Administrator Password - Thecus 1U4500R User Manual

Upgrading System Firmware

From the System menu, choose the
Firmware Upgrade item and the
Firmware Upgrade screen appears.
Follow the steps below to upgrade your
firmware:
1. Use the Browse button to find the
firmware file.
2. Press Apply.
3. The beeper beeps and the Busy LED
blinks until the upgrade is complete.
NOTE
WARNING

Change Administrator Password

From the System menu, choose the
Administrator Password item and the
Change Administrator Password screen
appears. Enter a new password in the New
Password box and confirm your new
password in the Confirm Password box.
Press Apply to confirm password changes.
See the following table for a detailed
description of each item.
Change Administrator Password
Item
New Password
Confirm Password
Apply
• The beeper only beeps if it is enabled in the System Notification
menu.
• Check Thecus website for the latest firmware release and release
notes.
Do NOT turn off the system during the firmware upgrade process. This
will lead to a catastrophic result that may render the system inoperable.
Description
Type in a new administrator password.
Type the new password again to confirm.
Press this to save your changes.
54