Table of Contents
Advertisement
2.13 PCI slot tool-free function operation
Open the plastic clip then take off the PCI bracket as follow.
17
Chapter3 Motherboard & Leads Installation
3.1 Motherboard Installation
Each motherboard has different standoff layout. It is highly
suggested that you refer to your motherboard's manual when
installing motherboard into the case. The cases are applicable
with Extend-ATX Standard ATX, Micro ATX motherboards.
Your motherboard may require a special I/O Panel, which should
be included with your motherboard.
Placement Direction:
When installing the motherboard, make sure you follow the
direction provided by your motherboard manufacturer. On most
standard motherboards, the edge with external ports goes to the
rear part of the chassis. It is highly recommended that you install
CPU, heat sink and modular components before fixing the
motherboard inside the chassis.
This side towards
the rear of the
chassis
Above illustration is a sample of what
the motherboard's layout. For more
detail screw hole placement, please
refer to your motherboard manual.
= the locations of
the screw holes. Note
these locations and
place included
standoffs on the chassis
first.
18
User's Maunal
Hide quick links:
Advertisement
Table of Contents
